Description:
Mobile Mixing Plants
M2.25
Wherever concrete is produced and moved is where you will find SCHWING - Stetter machinery. With plants in Germany,
Austria, USA, Brazil, Russia, China, and India, as well as with more than 100 sales and service facilities, the group of
companies is always close to the customer. Our wide range of products with something for every application is what makes
SCHWING - Stetter the No.1 system supplier for concrete machinery worldwide.
CONCRETE MIXING PLANTS
TRUCK MIXERS
TRUCK-MOUNTED CONCRETE PUMPS
STATIONARY CONCRETE PUMPS
SEPARATE PLACING BOOMS
CONCRETE RECYCLING PLANTS
SCHWING STETTER MOVES CONCRETE. WORLDWIDE
TOP SHOT RUNNERS
TOWER CRANES
SELF LOADING MIXER
Mobile Plants from Stetter Quality Concrete on site
Wherever larger quantities of high-quality concrete have to be supplied for any length of time to the construction sites,
mobile mixing plants from Stetter are ideal. It does not matter whether they are used for the construction of traffic routes,
dams, landfills or airports, the M series plants have been designed to handle the task. They can be quickly moved,
transported on low-bed semi-trailers and quickly set up again, thanks to the fully installed, pre-assembled compact units.
The current development status of the Mobile plant benefits from our vast experience worldwide.
M1 is equipped with Pan mixer and achieves a productive capacity of approx. 56 cum compacted concrete per hour. This is
also available with twin shaft mixer M1T. M 1.25 / 2.25 / 2.5 are featured withTwin shaft mixer. The output of compacted
3 concrete is approximately up to 112 m per hour based on models, thus making it comparable with medium sized stationary
plants.
Mixers from Stetter.
Technology for the Precise Production of Concrete
PAN MIXER FOR M1
Pan mixers allow you to produce quality concrete of all consistencies within a short mixing time and with low energy input, as they mix intensively with short mixing
paths both horizontally and vertically.The spring mounted mixing arms are protected against wear by means of polyurethane sleeves. Instead of the standard mixing paddles made of special chilled casting
you can also use, if you want, our mixers with paddles made of a synthetic material that
The mixing trough is lined with a replaceable inner wall, outer wall and floor wearing plates. You can lay out the mixer floor with regular wearing plates made of special
steel or special chilled cast tiles. The cover of the mixer can be opened up to 50% during cleaning and maintenance work. The mixer can be emptied simply via the slide or trapdoor.
TWIN SHAFT MIXER
Excellent mixing with short mixing and discharging
times, a wide range of applications as well as low wear:
these are the characteristics of Stetter's twin shaft
mixers in a compact design.
The high-performance twin shaft mixers from Stetter
achieve an intensive agitation of the mixture, and thus
you get a fast homogeneity of the mixture. The mixing
arms, made of high-quality cast steel, have a helical
arrangement.
This design features a large overlapping of tools and a
low fill factor which has a positive effect on the mixing.
Wear-resistant materials having a high degree of
hardness and toughness are used for the trough lining.
No matter which plant you opt for: these are the advantages
you receive, thanks to the modular system of the Stetter
mobile mixing plant.
Fast assembly and disassembly
Easily accessible
Compact and still easy to maintain
Economical, reliable
Optional mounting of an ice weigher
Optional mounting of a powder weigher
Optionally available with housing
WATER WEIGHER
The dosing of the mixing water is achieved
automatically by means of a patented weighing,
and nozzle system. The water system is designed so
that you can use fresh water, recycled water or hot
water without difficulty. After weighing, a special
pressure water pump delivers the mixing water into the
mixer.
ICE WEIGHER
The ice weigher is used for the weighing of flake ice. At the
bottom, the side walls are slightly sloped outwards which
ensures the complete discharge of the container.
ADDITIVE WEIGHER
On request, we will equip our mixers with a two-chamber
additive weigher. The additives are discharged via
discharge pumps that are automatically rinsed. The
additives are distributed over the entire mixture via a set of
nozzles.
Stetter mobile plants
hydraulically bound bases, recycled material, mortar or self-levelling floor screed.
Stetter mixing plants can be used anywhere in the world. Whether it is in the arctic cold, tropical humidity or extreme heat,
the Stetter mobile plants can be perfectly equipped for every climate zone, and have been proven reliable everywhere.
Thanks to steam injections and the addition of hot water, the winter design permits the production of concrete at 0 temperatures up to -30 C.
Stetter Mobile Plants. Versatile application options making them fit to be used anywhere in the world. M1 Batching plant with Compartment bins with
loader feeding option 23-year-old M1 Batching plant working at L&T Project site M1 Batching plant with Compartment bins with Conveyor feeding option
In-line silo Version The in-line silo is used for large quantities or if more than four kinds of aggregates are used.
The weighing takes place on a weighing belt which forwards the aggregates to the feeder skip.
:
Compartment version :
Compartment version is compact and is suitable for four types of aggregates. The aggregate can be
fed either through ramp and loader arrangement or through the Aggregate Feeding Conveyor.
Two options for aggregate storage silo are available. Stetter Mobile Plants Easy Assembly for Better Efficiency.
The plant is delivered to the construction site on a
Only a mobile crane is required for the erection. Due
to the fully installed, pre-assembled compact units, only
eight days are usually required until being put into
operation. The following applies to the disassembly and
reassembly: the plant can be used again after one week if
appropriate preparatory work has been performed.
The plant is assembled as fast as it is shipped. After
surveying, the plant is placed and aligned, with the help of a
crane, on a leveled compacted flat ground without
foundations.
The plant components with hinged joints are set up with a
crane, positioned and mounted without requiring any
welding. The pivoted upper part is then brought into the
final position. The support of the upper part is firmly
attached to the foundation platform with locking bolts.
The lateral ramp walls for the ramp drive together with the
compartment
need to the filled with sand and gravel and compacted to
complete the drive up
(optional) can be assembled in a single day.
MAIN FEATURES OF MCI360 CONTROL SYSTEM
1. Schedule based batching - Not usable in case of
2. Maintenance schedule.
3. Cement batching silo can be changed in between
in case of silo empty- Not usable in case of
4. Automatic calibration and manual calibration
available.
5. All kinds of statistical reports are available.
6. Slump measurement (optional).
7. PID control based batching (addition to the
material in air control).
8. Automatic batching after power recovery.
9.
10. Common software for all Stetter plants ranging
from M1 to H6.
11.
12.
control desk.
13. Connectivity to USB camera (optional).
14. Customer credit locking system (optional)- Not
usable in case of
15. Provision for slurry water batching.
16.
17. Facility to divert the concrete from one customer
to another (delivery docket) - Not usable in case of
18. Possibility for networking the plants (optional).
19. Option to integrate with Schwing 996
FLEXIBILITY AND INVESTMENT SECURITY
The architecture of our software produced with the
most modern methods of development in our own
works guarantees the highest flexibility: thanks to
their possibilities in configuration, software and
system offer simple adaptation to your operating
schedule-even if it changes in a few months.
Also, preparation of wiring diagrams and
works. So we can optimally suit the control
systems to our concrete mixing plants. Upon
request, we integrate our control system also in
external installations.
SCHWING STETTER CONTROL SYSTEM - MCI 550 QUALITY FROM OWN DEVELOPMENT AND PRODUCTION.
MCI 550 Control System
The MCI550 is the improved version of MCI360
which was launched 9 years
main advantage
depend upon any third party tool or editors to
execute. This system is also known for its speed
and accuracy.